Compact Full Featured Reverse Osmosis System 4 or 5 Stage

An easy to set up Reverse Osmosis System. Easy to use for an apartment, a boat, an RV, and in your home, when you don't want to take up all the space under the sink. This system can be attached to the side or back wall of your cabinet, so it is out of the way, or sit it down on the cabinet floor. Easy attachment to the plumbing system, simply unscrew the connection between the shut off valve and the faucet connector, and screw in the quick connect feed adapter.  All the connections are John Guest type quick connectors, when you have to change a filter, it's a snap. This unit has all the features of the full size reverse osmosis unit, just with a smaller footprint.

This unit comes with:

1st Stage - All of our sediment filters use multi-gradient spun polypropylene filter cartridges. These cartridges use the entire depth of their media by trapping the largest sediment particles on the outside of the filter, then gradually stepping down the size of particles they will reject as the water moves closer to the core of the filter. The result is longer filter life, greater dirt-holding capacity, higher flow rates, and remarkably low pressure drop. The 100% pure polypropylene media is highly resistant to bacteria and chemicals, making this an excellent choice for both well water and municipal water treatment applications.

2nd Stage - Carbon is a substance that has a long history of being used to absorb impurities and is perhaps the most powerful absorbent known to man. One pound of carbon contains a surface area of roughly 125 acres and can absorb literally thousands of different chemicals. Activated carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. As the water passes over the positively charged carbon surface, the negative ions of the of the contaminants are drawn to the surface of the carbon granules.

Reverse Osmosis Membrane - 100 GPD .

 

Sodium 
Sulfate 
Calcium
Potassium 
Nitrate 
Iron 
Zinc 
Mercury
Selenium 
Phosphate 
Lead 
Arsenic
Magnesium
Nickel 
Fluoride 
Manganese 
 

85 - 94%
96 - 98%
94 - 98% 
85 - 95% 
60 - 75% 
94 – 98% 
95 – 98% 
95 – 98% 
94 – 96% 
96 – 98% 
95 – 98% 
92 – 96% 
94 – 98% 
96 – 98% 
85 - 92% 
94 – 98% 

% may vary based on membrane type water pressure, temperature & TDS

Post Carbon Filter - A final "Polishing step that ensues a sparkling clean and pure water taste.

 Alkaline Filter - Reverse Osmosis product water is more acidic due to it's purity. By the time the water is processed through the various stages, after the reverse osmosis stage, minerals etc has been removed. To replenish necessary minerals, an alkaline filter is recommended. the 4th stage of this system is an alkaline filter, which replaces calcium, magnesium, sodium potassium ion etc, taken away during the purification process. The 5th stage is an inline carbon filter that polishes the water for a sparkling taste.

Neg ORP Far Infrared Remineralizing Filter -Designed to  add essential minerals back ie. calcium, magnesium, potassium and sodium, as well as to provide the anti oxidant qualities of Negative ORP and Far Infrared in a filter. This filter will increase the alkalinity without over correcting.This alkaline antioxidant filter provides abundant Active Hydrogen and also increases reduction power by increasing pH, making small water cluster and providing beneficial minerals. Negative ORP, which is produced with ionized alkaline water, severely retards the aging process.  By counteracting oxidative damage to our cells.  It does this  by hunting down free radicals in our system and neutralizing them. Negative ORP is a very powerful anti-oxidant. and is found naturally in orange juice, glacial runoff and deep underground uncontaminated aquifer or spring water. Contains KDF55!